Sync; Input Signal Display - Panasonic TH-42PH20E Operating Instructions Manual

Setup for Input Signals

Sync

This function operates only during input from PC IN terminal.
Select Signal from the "Setup" menu during RGB or Component input signal.
Setting RGB sync signal
Confi rm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
Setting Component sync signal
Confi rm that the input is set to Component input (this setting is valid only for Component input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
on Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with "Sync on G"

Input signal display

Displays the frequency and the type of the current input signal.
This display is valid only for Component / RGB / PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.
42
Press to select the "Sync".
Press to adjust.
Signal
Sync Auto
Cinema reality Off
XGA Mode Auto
H-Freq. 63.98 kHz
V-Freq. 60.02 Hz
Signal Format 1280×1024/60
H-Freq. 63.98 kHz
V-Freq. 60.02 Hz
Dot Clock Freq. 108.0 MHz
Signal Format 1280×1024/60
[ RGB ]