Sync; Input Signal Display - Panasonic TH-42PH11EK Operating Instructions Manual

Sync

Select Signal from the "Setup" menu during RGB input signal.
Setting RGB sync signal:
Confi rm that the input is set to RGB input (this setting is valid only for RGB input
signal).
Auto: The H and V sync or synchronized signal are automatically selected. If
both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input from
the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input
from the HD connector.

Input signal display

Displays the frequency and the type of the current input signal.
This display is valid only for Component / RGB / PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
Press to select the "Sync".
Press to adjust.
Setup for Input Signals
Signal
Sync
Cinema reality
XGA Mode
Sync
Sync
Sync
H-Freq. 63.98
V-Freq. 60.02
Signal Format 1280×1024/60
[ RGB ]
Auto
Off
1024 × 768
Auto
on G
VBS
kHz
Hz
37