Vcr Mode; Playing Back; Finding A Scene You Want To Play Back - Panasonic NV-MD9000EN Operating Instructions Manual

VCR Mode

Playing Back

The recorded scene can be played back
immediately after the recording.
1
Set the [OFF/ON] Switch
CAMERA
VCR
OFF ON
(50)
2
Press the [MODE] Button.
≥The [VCR] Lamp
(48)
lights up.
(47) (48)
CAMERA
VCR
3
Press the [6] Button
tape.
(20)
SEARCH
≥Rewind the tape to the point where you
want to start playback.
≥When the tape reaches the beginning,
rewinding stops automatically.
4
Press the [1] Button (22)
playback.
≥The [!] Indication appears.
(22)
BLC
To Stop Playback
Press the [∫] Button (21) .
(21)
FADE
VCR Mode
(50)
to [ON].
(47)
(20) to rewind the
to start
-57-
ª Adjusting the Sound Volume
Until the [VOLUME] Indication appears, keep
pressing the [PUSH] Dial (14)
[PUSH] Dial to adjust the volume. After the
adjustment, press the [PUSH] Dial to make the
[VOLUME] Indication disappear.
W.B/SHUTTER/IRIS
(14)
VOL/JOG
To adjust the volume with the Remote
Controller, press the [T] or [W] Button to display
the [VOLUME] Indication. Press the [T] Button
to increase the volume or press the [W] Button
to decrease the volume. The [VOLUME]
Indication goes off a few seconds after the
adjustment is finished.
≥The sound volume cannot be adjusted using
the Remote Controller in Playback Zoom
Mode. ( )
-59-
≥If a cassette recorded with a copyright
protection signal is played back, the picture is
distorted by mosaic-like patterns.
≥For other notes concerning this item, see
Finding a Scene You Want to Play
Back
ª
Cue/Review Playback
(20)
SEARCH
(23)
SEARCH
If the [5] Button (23) or [6] Button
pressed during Playback, it turns to Cue
Playback A or Review Playback B.
A B
≥If the Button is held continuously, it turns to
Cue Playback or Review Playback until you
release it.
ª
Variable Speed Search Function
The speed of Cue Playback or Review Playback
can be varied.
1
During playback, press the [1] Button
(22) .
≥The [1k!] Indication appears.
(22)
BLC
. Then, turn the
.
-66-
(20) is