Playback Digital Effect Functions; Playing Back On Your Tv; Audio Dubbing - Panasonic NV-MD9000EN Operating Instructions Manual

Playback Digital Effect Functions

During playback, special digital effects can be
added to the recorded pictures. The same
effects as those of Picture Effects, which are
used during recording, are obtained.
1
Press the [1] Button (79)
V /REW PLAY FF/ W
(79)
6 1 5
STILL ADV PAUSE STILL ADV
E D
;
INDEX STOP INDEX
K L
∫
SELECT
2
Press the [SELECT] Button
Remote Controller to select a desired
digital effect.
K L
∫
SELECT
(68)
VAR.
SEARCH ZOOM
STORE
MENU
OFF/ON
(70)
ITEM
P.B.DIGITAL
≥When the [SELECT] Button is pressed
repeatedly, the digital effect selection
changes.
≥The same setting can be done using
[DIGITAL EFFECT] Sub-Menu on the
[VCR FUNCTIONS] Main-Menu.
To suspend Playback Digital Effect
Temporarily
Press the [OFF/ON] Button
restart the digital effect. When the digital effect
is paused temporarily, the selected effect's
indication flashes.
To Cancel the Digital Effect
Press the [SELECT] Button
Controller and clear the digital effect indication.
ª
Wipe Mode and Mix Mode
1
Press the [1] Button (79)
V /REW PLAY FF/ W
(79)
6 1 5
STILL ADV PAUSE STILL ADV
E D
;
INDEX STOP INDEX
K L
∫
SELECT
2
Press the [SELECT] Button
Remote Controller and select [WIPE] or
[MIX].
K L
∫
SELECT
(68)
VAR.
SEARCH ZOOM
STORE
(69)
MENU
OFF/ON
(70)
ITEM
P.B.DIGITAL
3
Press the [STORE] Button
moment you want to save as a still picture.
≥The [B] or [C] Indication appears,
and the image is saved.
4
Press the [OFF/ON] Button
scene in which you want to use the Wipe
or Mix effect.
≥The scene changes as a result of the Wipe
or Mix effect.
≥The Wipe Function and Mix Function can be
used only from the Remote Controller during
playback.
≥If the [OFF/ON] Button
(70)
Wipe or Mix is carried out, the effect will stop
temporarily at that point. Pressing the [OFF/
ON] Button (70) again will bring back the
effect.
VCR Mode
T
.
W
T
W
(68) on the
P.B.
SET
(70) to suspend or
(68) on the Remote
T
.
W
T
W (68) on the
P.B.
SET
(69)
at the
(70)
in the
is pressed while
-60-
≥For other notes concerning this item, see

Playing Back on Your TV

By connecting your Movie Camera with your TV,
the recorded scenes can be viewed on your TV
screen.
≥Before connecting them, turn off the power of
both the Movie Camera and TV.
After connecting the Movie Camera and the
TV as illustrated, start playback.
[S-VIDEO IN]
2 1
S-VIDEO VIDEO AUDIO
L–
IN/OUT IN/OUT IN/OUT
≥Using the AV Cable 1, make a connection
with the TV. If the TV has an S-Video
Socket, connect the S-Video Cable 2, too.
To Make the Indications Appear on the TV
Screen
Press the [OSD] Button (60)
Controller.
START/
DATE/ PHOTO
STOP
OSD SHOT
TIME
(60)
≥For other notes concerning this item, see

Audio Dubbing

You can add music or narration to the recorded
Cassette.
≥If the tape recorded in the [16bit] Mode is
dubbed with the Audio Dubbing function, the
original sound is erased. (If you wish to
preserve the original sound, use the [12bit]
Mode when recording.)
≥Audio Dubbing cannot be performed on a
recording done in LP Mode. (
1
Set [VCR FUNCTIONS] >> [AV IN/
OUT SETUP] >> [AV JACK] >> [IN/OUT].
W.B/SHUTTER/IRIS
(14)
VOL/JOG
MENU
(18)
2
Continuing the aforesaid setup, select
[A.DUB INPUT] >> [MIC] or [AV IN].
≥Set to [AV IN] when external device is used,
and to [MIC] when an external or built-in
microphone is used.
3
Switch the Movie Camera over to the Still
Playback Mode where you want to add
new sound.
.
-66-
[VIDEO IN]
[AUDIO IN]
–R
on the Remote
T
.
-66-
W
)
-47-