Setting The Clock Of Your Vcr; Settings Using The On Screen Display - Panasonic NV-HV62GH Operating Instructions Manual

Setting the Clock of Your VCR

In the event of a power failure, the clock will operate on its
back up system for a minimum of 3 years. After 3 years, clock
back up in the event of a power failure can only be
guaranteed for maximum of 1 hour.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
Operations
1 Press [MENU] (9) to display the
Main menu on the TV screen.
2 Press [43] (28) to select [CLOCK
SET] then press [ENTER] (26).
3 Set each item by pressing
[2 1 4] (28). Press [3] (28) to
return to the previous item.
At the set time (TIME) point:
• When [2 1] (28) is kept pressed,
the indication changes in 30-minute
steps.
4 Press [MENU] (9).
• The clock starts.
Time Reset Function
If the clock is less than 2 minutes slow or fast, it can easily be
reset to the proper time.
Example:
Resetting the clock to 12:00
1 Press [MENU] (9) to display the Main menu on the TV
screen.
2 Press [43] (28) to select [CLOCK SET] then press
[ENTER] (26).
3 When the current clock displays on the VCR is
between 11:58 and 12:01, press [MENU] (9) as soon as
you see the 12:00. This resets the time to 12:00.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
To Set the Colour TV System
1 Press [MENU] (9) to display the
Main menu on the TV screen.
2 Press [43] (28) to select
[SYSTEM] then press [ENTER]
MENU
CLOCK SET
(26).
TUNER PRESET
SYSTEM
OPTION
3 Press [43] (28) to select
TAPE REFRESH
NAVI MEMORY 0 PROG.
[AUTO].
SELECT : , ENTER
END :MENU
• The VCR automatically distinguishes between PAL,
SECAM/MESECAM and NTSC signals. If the picture
lacks of colour during AV external recording or playback,
MENU
set to [PAL], [MESECAM] or [NTSC].
CLOCK SET
TUNER PRESET
SYSTEM • When you want to record or play back in black and white,
OPTION
TAPE REFRESH
set to [B/W].
NAVI MEMORY 0 PROG.
SELECT : , ENTER
4 Press [MENU] (9) twice to exit the On Screen Display.
END :MENU
To Make Various Indicators Appear On
Screen Display
CLOCK SET
At a press of [STATUS/ NAVI
YEAR 2005
MONTH 1
CHECK] (32), the following
DATE 1 [SA]
TIME 0:00
indications appear on the TV
SELECT:
START: MENU
screen.
• Set [OSD] to [AUTO].
(See page 9.)
• The display is released
automatically after 5 seconds.
1 Audio Output Mode Indicators
At each press of [AUDIO] (22), the selected sound mode is
indicated with Left (L) and Right (R).
Stereo: Both the Left (L) and Right (R) Indicators appear.
Left:
Right:
Normal: Neither the Left (L) nor Right (R) Indicator appears.
• At every push of this button, the audio output mode
changes as follows.
During playback:
Stereo # L # R # Normal audio track # Stereo
While the broadcast signals are being received:
Stereo # L # R # Normal # Stereo
2 STEREO, M1 and M2 Indicator
When receiving a TV programme with the Stereo, Bilingual
or NICAM sound system, the type of sound system in
which it is broadcast is automatically indicated.
STEREO:When receiving a Stereo/NICAM stereo
M1/M2:
M1:
• To hear stereo performance connect as shown on page 4
to a TV or Stereo Amplifier with left and right audio inputs.
3 Programme position
Settings Using the On Screen
Display
The Left (L) Indicator appears.
The Right (R) Indicator appears.
broadcast.
When receiving a Bilingual/NICAM dual-sound
broadcast.
When receiving a NICAM monaural broadcast.
SYSTEM
AUTO
PAL
MESECAM
NTSC
B/W
SELECT:
END :MENU
1 2 3 4 5 6
CH 1 0:00.22
7
STEREO
SP
L R
PAL
8
12 / 16. [ FR ]
9
ON 20:13 CH 2 DRAMA
LSQT0876
7