Pacific Digital MemoryFrame User Manual page 47

Pause/Select ( || ) button. The MemoryFrame will display sub-menu
items underneath the thumbnail display. When these options are
displayed, the navigation keys operate on the menu items and not
the thumbnails.
Now that you have selected the picture you want to transfer, you
must now select either "Save to Picture Frame" or "Cancel" to
return to thumbnail navigation. Highlight either option and press
the Pause/Select ( || ) button.
9.2.6 Fill MemoryFrame from Camera (or Reader)
This choice simply transfers as many pictures from the
camera/reader as will fit into the MemoryFrame's memory and
eliminates thumbnail viewing and button based selection. It allows
you to start the transfer and not have to be present to interact with
the process. It is faster than selecting specific thumbnails for
transfer.
Important! Before selecting this item, you must first perform all the
steps in either Chapter 7 "Camera Connection to MemoryFrame"
or Chapter 8 "Card-Reader Connection to MemoryFrame.
To enter this menu, highlight "Fill MemoryFrame from Camera,"
and press Pause/Select for the MemoryFrame to enter it's picture
transfer mode (from camera or reader).
A progress meter bar will show you the progress of the image
transfer. The higher the mega-Pixel resolution of the images, the
longer this progress may take.
If no device is attached when select this function (or if the camera
or reader is not USB Mass Storage compatible), you will get a
message that says "No Camera or Pictures Found." If your device
is attached and has pictures, try again.
Copyright© 2002-2003 Pacific Digital Corporation
Page 44