Pacific Digital MemoryFrame User Manual page 45

9.2.4.7 Set Background (Fill) Color
Your MemoryFrame will fill any unused portion of the screen with a
background of your choice from the list of colors. This reduces the
"black bar" effect seen when pictures do not have the same 4:3
proportion as the MemoryFrame screen (see Section 10.1 for more
information).
Once selected you are given the choice to apply this Color to either
"Only This Picture" or alternatively to "All Pictures"
9.2.4.8 Cancel
If you select and execute Cancel, the MemoryFrame will return you to
the thumbnail navigation mode, leaving the current picture selected.
9.2.5 Download Pictures (from USB Camera or Reader)
Important! Before selecting this item, you must first perform all the
steps in either Chapter 7 "Camera Connection to MemoryFrame"
or Chapter 8 "Card-Reader Connection to MemoryFrame.
The initial menu view for Download Pictures (from Camera/Reader) is
very similar to the prior Picture Configuration sub-menu section). The
major difference is that all the thumbnail pictures displayed are from the
Camera or USB Memory-Card reader, and not from the MemoryFrame's
picture storage memory.
To enter this menu, highlight "Download Pictures," and press
Pause/Select for the MemoryFrame to enter it's picture transfer
mode (from camera or reader).
Important! This function will display thumbnail images from the
camera or Reader, and the thumbnails will take a few moments to
appear, and you will be unable to select a picture or move the
highlight until the first 3 thumbnails have appeared in their entirety.
A progress meter bar will show you the progress of the image
transfer. The higher the mega-Pixel resolution of the images, the
longer this progress may take.
If no device is attached when select this function (or if the camera
or reader is not USB Mass Storage compatible), you will get a
message that says "Device Empty/Not Connected." If your device
is attached try again.
Page 42
Copyright© 2002-2003 Pacific Digital Corporation