Pacific Digital MemoryFrame User Manual page 44

of the "Hidden" feature, MemoryFrame will automatically record the
change and return to the thumbnail navigation mode.
9.2.4.5 Set Transition Effect
Your MemoryFrame features seven (7) choices for transition effects
between images These are the same as those selectable with the PC
application software, Digital PixMaster. When you choose a transition
effect, this menu selection will save the changes into memory and then
return you to thumbnail navigation mode. The transitions in your
MemoryFrame may differ from those listed below, depending on the
version of software shipped with your MemoryFrame.
No Effect: The next image simply appears replacing the previous.
Wipe Down: The next image wipes down from the top of the
screen.
Wipe Right: The next image wipes from the left of the screen
towards the right side.
Box out: The next image appears from center in small box and
expands towards edges.
Tile Fill Down: The old image is tiled over as the new image wipes
down from the top.
Tile Box out: The old image is tiled over as the next image appears
from center and expands towards edges to replace the previous.
Diagonal Fill: The next image overwrites with diagonal stripes to
replace the previous.
Once selected you are given the choice to apply this Effect to either
"Only This Picture" or alternatively to "All Pictures"
9.2.4.6 Set Transition Delay (the delay between slide changes)
You can select the amount of time the selected photo image will display:
from 10 seconds to several hours. Upon selection of a time
MemoryFrame will automatically, record the change and return to
thumbnail navigation mode.
Once selected you are given the choice to apply this Time to either
"Only This Picture" or alternatively to "All Pictures"
Copyright© 2002-2003 Pacific Digital Corporation
Page 41