Help - Internet Updates - Pacific Digital MemoryFrame User Manual

Usb digital photo frame

Hide thumbs Also See for MemoryFrame:

User manual (63 pages)

Table Of Contents

Table of Contents

Important! Because MemoryFrame will overwrite an existing

slideshow if a new one is sent to it, you may want to first Retrieve the

existing show to your PC for saving on your PC hard drive before

sending a new one.

First open the show you want to send on the PC. From the

"MemoryFrame" pull-down menu of Digital PixMaster, select

Send-Slideshow. This function is also available by clicking on

"send-slideshow" icon (

slideshow to the MemoryFrame. When the application sends the

Send-Slideshow command, the MemoryFrame will erase its current

slideshow, then read in the new show over the USB connection

from the PC and save it into its onboard memory.

After you click on Send, Digital PixMaster will display a progress

bar to indicate the transfer of the new images to MemoryFrame.

Important! When the progress bar is complete, it only signifies that the

file has been transferred, but not yet stored in memory. This is just the

beginning of the MemoryFrame's actual process of updating its

Slideshow, so do not turn off the power

After the transfer is complete, the MemoryFrame will erase the

current slideshow portion of its memory and program in the new

slideshow image. You must wait up to one (1) minute for the frame

to complete the slideshow change.

Important! Do not unplug or cut power to the MemoryFrame or PC

during the send slideshow process!

Once the new slideshow has been loaded into the MemoryFrame's

storage memory, the MemoryFrame will indicate it is done by

displaying the first new image of the slideshow. A power-cycle is

not required.

6.7