Using This Unit - Panasonic SC-HTB20 Quick Start Manual

Step 2: Connect the cables
Do not connect the AC mains lead to the active subwoofer until all other connections are complete.
When the TV is HDMI (ARC) compatible
HDMI IN
Be sure to connect to the TV's ARC
TV
(ARC)
compatible terminal. (Refer to the
TV's operating instructions.)
Active
subwoofer
HDMI cable
AC mains lead
To a household mains socket
110-127V• •220-240V
(For South East Asia and the Middle East)
Before connecting the AC mains lead, set the voltage.
VOLT ADJ
When the TV is non HDMI (ARC) compatible
OPTICAL
HDMI IN
TV
OUT
Optical
Active
digital
subwoofer
audio cable
AC mains lead
To a household mains socket
110-127V• •220-240V
(For South East Asia and the Middle East)
Before connecting the AC mains lead, set the voltage.
VOLT ADJ
HDMI (ARC)
Audio Return Channel:
Allows a home theater
system to receive and
play audio from the TV
through a HDMI cable
without additional wiring.
White
Red
HDMI cable is required
for VIERA Link "HDAVI
Control"
HDMI cable
When the TV is VIERA Link "HDAVI Control
HDMI CEC compatible
Turn on the active subwoofer.
Turn on the TV, and select this home theater system as the TV's speakers from the
VIERA Link menu.
≥ If the TV is not a Panasonic TV, set the "Receiver" or "External speakers" to "On".
Press [i VOL j] on the TV's remote control to adjust the volume.
§ Operation with other manufacturers' equipment that supports HDMI CEC cannot be guaranteed.
≥ For details about VIERA Link (HDMI), refer to page 24 of the operating instructions.
When the TV is not VIERA Link "HDAVI Control
HDMI CEC compatible
Turn on the active subwoofer and the TV.
Press [TV] to select the TV sound.
White
Press [i VOL j] to adjust the volume.
Red
≥ If there is sound from the TV's speakers too, then use the TV's remote control to lower the volume to
minimum.
For wall mounting and other details, be sure to refer to the operating instructions.

Using this unit

e.g. TV remote control
e.g. TV remote control
" or
TM
" or
TM