TRAILING-SHUTTER-CURTAIN SYNC FLASH
In normal electronic flash photography, the flash
fires at the instant the first shutter curtain complete
its travel. In the trailing-shutter-curtain sync flash
mode, the flash is fired at the instant the second
curtain begins its travel.
《28》
■ Procedure
1
Set the power switch to the [ON] position.
2
Set the sync mode switch to the TRAILING
CURTAIN [
] position.
3
Confirm the Ready lamp lights up and then
discharge the flash.
• Trailing-shutter-curtain sync flash mode will be
P-TTL auto flash.