Samsung SEF-36PZF User Manual page 24

3
Press the [S] select button so that [Aperture
value] on the LCD panel blinks. Turn the
adjustment dial to set the desired aperture
value. Then press the [S] button so that [ISO]
blinks on the LCD panel. Turn the adjustment
dial to set the [ISO]. Next, press the select
button once so that the blinking stops. This
completes the setting.
4
Set the lens aperture to the same [F no.]
aperture you set with the flash unit.
5
Set the flash zoom position to match the lens
focal length.
Set this manually even with an autofocus lens.
6
Check that the flash is ready and then take the
picture.
《24》
• When the camera's exposure mode is
Programmed AE or Shutter-Priority AE, the
aperture value set on the flash will be
automatically set on the camera.
• The ISO values of the flash and camera do not
correspond automatically. Set the ISO value of
the flash manually.
• The possible photography distance range will
be displayed on the LCD panel.
• If the power is turned temporarily OFF, the
flash will be set to P-TTL or TTL auto. Return
the setting to Auto flash.
• Under the following conditions, you can select
the Auto flash mode.
* When the camera's exposure mode is
metered manual mode.
* When the camera's exposure meter switch is set
to OFF.
• The sync mode will be fixed in Leading
curtain-sync.