Table of Contents
Advertisement
3
When the power switch is set to the [ON]
position, the Ready Lamp lights up to indicate
that the flash has been charged and is ready to
fire. Then, by pressing the Test Button, the test
flash will fire.
BATTERIES
This flash unit operates with four AA-size batteries
as shown below.
Alkaline battery
Lithium battery
Nickel Hydroxide battery : Ni-MH
The flash unit charges in approximately 6 seconds
with brand new alkaline batteries, 5 seconds with
Nickel Hydroxide battery and 6 seconds with lithium
batteries. If charging time takes more than 20
seconds, then the batteries are weak and should be
replaced with the same type of new batteries.
• If the batteries are not inserted properly, the Ready Lamp
will not light up. Insert the batteries correctly. If the flash
is not turned on when you insert the batteries correctly,
insert brand new alkaline batteries.
• If you let the flash unit fire in succession on
lithium batteries, heated batteries would
activate the safety circuit so that the firing is
temporarily disabled. In this case, take time to
reduce the battery temperature and it would
bring you back to the normal condition of use.
: LR6
: FR6
《13》
Hide quick links:
Advertisement
Table of Contents
