Sending A Fax By Automatic Dialling - Sharp UX-A555 Operation Manual

5
When you hear the fax tone, press
•
If the transmission is completed successfully, the fax will beep once.
•
If an error occurs, the fax will beep three times and print a Transaction
Report to inform you of the problem (see page 75).
Note: If the transmission is unsuccessful and DOCUMENT JAMMED appears
in the display, remove the document as explained on page 88.

Sending a Fax by Automatic Dialling

You can store up to 40 fax or phone numbers in the machine for automatic
dialling.
♦
Auto-dial numbers are dialled by pressing
appears in the display, and then
Storing fax and phone numbers for automatic dialling
1
Press once and
2
Press once.
3
Enter the fax or voice number by pressing the number keys. Up to 32
digits can be entered. (Note: A space cannot be entered.)
•
To clear a mistake, press
•
If a pause is required between any of the digits to access a special service
or an outside line, press
seconds per pause). Several pauses can be entered in a row.
4
START/MEMORY
Press
Sending a Fax by Automatic Dialling
START/MEMORY
. Replace the handset.
START/MEMORY
.
once.
.
DIGITAL
SPEAKERPHONE
. The pause appears as a hyphen (two
until the desired number
Display:
<NEW NUMBER>
ENTER FAX #
47