Loading Printing Paper
4
Push the paper plate back down.
Note: If at any time the display shows the
alternating messages at right, check the printing
paper. If the tray is empty, add paper. If there is
paper in the tray, take it out and then reinsert it.
When you are finished, press
Print contrast setting
Your fax has been set at the factory to print at normal contrast. If desired, you
can change the print contrast setting to LIGHT or DARK.
1
Press
2
Press
3
Press
4
Select the print contrast:
NORMAL:
5
STOP
Press
16
START/MEMORY
once and
once.
once and
twice.
once.
LIGHT:
to exit.
.
DARK:
ADD PAPER &
PRESS START KEY
Display:
OPTION SETTING
PRINT CONTRAST
1:NORMAL
The display briefly shows
your selection, then:
COPY CUT-OFF