Tandem Copy - Sharp AR-505 Operation Manual

TANDEM COPY

If this copier is connected with another copier of the same model through
the SCSI cable, copying can be performed using the two copiers allowing
copying to be twice as fast as copying on one copier when making multiple
copies.
A dedicated SCSI cable AR-CA1 is required for tandem copying.
The tandem copying can be used only in the sort mode or staple sort
mode. The group mode cannot be selected.
The transparency inserts function cannot be used with this function
because the number of copies must be 1 when the transparency inserts
function is used.
When tandem copying is to be performed, either of the two connected
copiers can be used as the main copier. When the tandem function is
selected on one of the copiers, the other will become the sub copier. The
setting procedure is described below.
INTERRUPT will not function during tandem copying.
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT ERASE
MULTI SHOT COVERS
TANDEM
IMAGE EDIT
COPY
AUTO AUTO A4
EXPOSURE PAPER SELECT
Ensure that the two copiers are connected through the
1
SCSI cable and they have been turned on.
On the copier that will be set as the main copier, place
2
the originals in the document feeder tray or on the
document glass.
Press the SPECIAL MODES key.
3
The SPECIAL MODES screen will appear.
READY TO CO
Press the "TANDEM COPY" key on the touch panel.
4
The "TANDEM COPY" key will be highlighted.
OK
DUAL PAGE
COPY
TRANSPARENCY
INSERTS
TEXT STAMP
100%
COPY RATIO
3-43