Touch Panel (Basic Screen) - Sharp AR-505 Operation Manual

Touch Panel (Basic screen)

CUSTOM SETTINGS (
Press to set key operator programs or adjust the
contrast of the touch panel.
2-SIDED COPY key
Press to select the 1-sided to 1-sided, 1-sided to
2-sided, 2-sided to 1-sided or 2-sided to 2-sided
copy mode.
OUTPUT key
Press to select the finisher mode: SORT or
GROUP.
EXPOSURE display
Indicates the selected exposure mode.
EXPOSURE key (p. 2-16)
Press to select the exposure mode: AUTO,
TEXT, TEXT/PHOTO, or PHOTO.
PAPER SELECT display
Displays the selected paper size. When "AUTO"
is displayed, paper size matching the original and
copy ratio will be automatically selected.
PAPER SELECT key
Press to select the desired paper tray.
COPY RATIO display
Displays the copy ratios for reductions or
enlargements.
READY TO COPY.
1. A4
2. A3
AUTO AUTO A4
EXPOSURE PAPER SELECT
) key
PART NAMES AND FUNCTIONS
A4
ORIGINAL
A4R
106~200 g /m
2
100%
COPY RATIO
COPY RATIO key
Press to select a reduction or enlargement copy
ratio or select the automatic copy ratio selection
mode.
REVIEW ( ) key
Press to check the settings of selected functions.
Initial settings
The copier assumes the initial settings when it is
turned on, when the CLEAR ALL (
and approximately 1 minute after the last copy is
made in any mode.
Copy ratio: 100%
Automatic exposure
Copy quantity: 0
All special copier modes are set to off.
Tray select: Paper tray 1
Optional large capacity tray will be selected when
installed.
KEY OPERATOR Initial settings can be
programmed as desired. The auto clear time can also
be changed. See pages 8-19 and 8-24.
) key is pressed,
CA
6-5