Text Stamp; Date - Sharp AR-505 Operation Manual

TEXT STAMP

The text stamp functions include the following functions.
Date: Adds the current date to the copies.
Select stamp: Adds a selected stamp to the copies.
The stamp will be printed in white on a shaded
background.
Watermark: Adds a selected watermark to the copies.
The watermark will be printed in gray tone.
Page number: Adds page numbers to the copies.

DATE

July 23, 1999
3-30
The DATE function adds the current date to the copies. The date will be
printed at the upper right of the copies.
If reduction or enlargement is used with this function, the print
position may move or the date may not be printed.
KEY OPERATOR To use the DATE function, set the current date and
time. See page 8-21. The initial setting of the date format can be changed.
See page 8-20.
Place the originals in the document feeder tray or on the
1
document glass.
Press the SPECIAL MODES key.
2
The SPECIAL MODES screen will appear.
READY TO CO
These functions are selected by pressing the "TEXT
STAMP" key on the SPECIAL MODES screen and then
selecting from the "TEXT STAMP" menu.
These functions will not work when non-standard size
paper is used.
Multiple text stamp functions can be selected at the
same time except for SELECT STAMP and
WATERMARK. These functions cannot be selected
together.
Depending upon the original image type, the watermark
may obscure some of the copied image or vice versa.
The size of printed characters is fixed.
The size will not vary even in reduction or enlargement
copying.