Table of Contents
Advertisement
COPY.
A4R
1.
A4
2.
A3
O
AUTO 8/ 11
1
100%
2
URE
PAPER SELECT
COPY RATIO
1
2
3
INT
4
5
6
7
8
9
AUDIT CLEAR
PROGRAM
0
P
2
1
2
1
4
3
Press the "PAPER SELECT" key on the touch panel and
5
then select the bypass tray.
If paper type selection has been enabled, select "60 ~ 105 g/m
("16 ~ 28 lbs.") or "106 ~ 200 g/m
CLEAR ALL
If "60 ~ 105 g/m
CA
is used, a misfeed may occur.
Set the number of copies.
6
START
Press the START (
7
Two-sided copying with bypass tray
Two-sided copies can be made manually using the bypass tray,
when the heavy paper which is out of specification for duplex module
is used.
Place the first original face down on the document glass
1
and make a copy.
The first side of the copy can be made using any of the paper feed
stations.
Replace the first original with the second original and
2
close the document cover.
Make sure the first and second originals are oriented in the same
way on the document glass.
The first and second originals can be set in the document feeder
tray. They must, however, be set and fed individually.
Turn the first copy over without changing its top-bottom
3
orientation and place it into the bypass tray.
Be sure to feed the copies one sheet at a time.
1 2
Press the "PAPER SELECT" key and select the bypass
4
tray.
If paper type selection has been enabled, select "60 ~ 105 g/m
("16 ~ 28 lbs.") or "106 ~ 200 g/m
Press the START (
5
SPECIAL PAPERS (manual feed)
READY TO COPY.
1.
A4
2.
A3
AUTO
EXPOSURE
PAPER SELECT
" ("16 ~ 28 lbs.") is specified and heavier paper
2
) key.
) key.
" ("28+ ~ 55 lbs.").
2
A4R
PAPER TYPE
60~105 g/m
2
106~200 g/m
2
100%
COPY RATIO
" ("28+ ~ 55 lbs.").
2
2-15
"
2
"
2
Advertisement
Table of Contents
Troubleshooting
