Chicago Electric Chicago 44849 Assembly Information page 6

4. The red light on the Charger turns on when you insert the Battery into the Battery
Charger, indicating that the electric current is charging the Battery. If the red light does
not come on, recheck the Transformer cord connection or try a different electrical outlet.
The red light will shut off when the Battery is fully charged, and then the green light
will turn back on automatically.
5. The Battery (11) will charge in approximately 1 to 1-1/2 hours
tery for longer than 2 hours. Subsequent charges will also take between 1 and 1-1/2
hours. Allow charger to cool down before charging another battery.
1. When the Battery (11) is fully charged, remove the Battery from the Battery Charger.
2. Insert the Battery into the Battery Receptacle located at the bottom of the Drill. Make
sure the two Securing Clasps (one on each side of the Battery) engage the Drill.
(See Figure C.)
SKU 44849
To Attach The Charged Battery To The Drill:
SECuRING CLASP
BATTERY
For technical questions, please call 1-800-444-3353.
BATTERY
RECEPTACLE
. Do not charge the Bat-
FIGuRE C
Rev 03a; 05j
Page 6