Chicago Electric 60495 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Drill
  5. 60495
  6. Owner's manual & safety instructions

Chicago Electric 60495 Owner's Manual & Safety Instructions

1/2" variable speed reversible hammer drill
Hide thumbs Also See for 60495:
Table of Contents

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
1/2" VARIABLE
SPEED REVERSIBLE
HAMMER
DRILL
Email our technical support at: productsupport@harborfreight.com
REV 14f
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 60495

Advertisement

Table of Contents
loading

Related Manuals for Chicago Electric 60495

Summary of Contents for Chicago Electric 60495

  • Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 60495 1/2" VARIABLE SPEED REVERSIBLE...

  • Page 2: Table Of Contents

    2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 60495...

  • Page 3: Electrical Safety

    Trigger on invites accidents. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area. Item 60495 For technical questions, please call 1-888-866-5797. Page 3...

  • Page 4: Power Tool Use And Care

    Turn off the tool, and unplug it from its electrical outlet before leaving. 11. This product is not a toy. Keep it out of reach of children. Page 4 For technical questions, please call 1-888-866-5797. Item 60495...

  • Page 5: Vibration Safety

    If any abnormal as tingling, numbness, and white or blue fingers), vibration occurs, stop use immediately. seek medical advice as soon as possible. SAVE THESE INSTRUcTIONS. Item 60495 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Page 6 For technical questions, please call 1-888-866-5797. Item 60495...

  • Page 7: Extension Cords

    Risk of Fire. Alternating Current Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning Amperes Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 60495 For technical questions, please call 1-888-866-5797. Page 7...

  • Page 8: Specifications

    No Load Speed 0-2800 RPM 1/2″ in Steel 1/2″ in Concrete Drilling Capacity 1″ in Wood (Hammer Drill and Drill mode) 1/16″ to 1/2″ Chuck Size Three Jaw Key Type 4006176 Page 8 For technical questions, please call 1-888-866-5797. Item 60495...

  • Page 9: Setup

    Functions Side Handle Mode Depth Gauge Selector Trigger Lock Button Direction chuck Switch Trigger Key Holder Power cord Item 60495 For technical questions, please call 1-888-866-5797. Page 9...

  • Page 10: Operation

    The power cord must reach the work area with enough extra length to allow free movement while working. Page 10 For technical questions, please call 1-888-866-5797. Item 60495...

  • Page 11: General Operating Instructions

    3. Clean the bit flutes regularly while drilling. 6. When drilling deep holes, work in stages, use a short bit for the beginning of the hole, then change to a longer bit. Item 60495 For technical questions, please call 1-888-866-5797. Page 11...

  • Page 12: Maintenance

    • damaged cord/electrical wiring, • cracked or broken parts, and • any other condition that may affect its safe operation. Page 12 For technical questions, please call 1-888-866-5797. Item 60495...

  • Page 13: Troubleshooting

    See Extension Cords in Grounding section on page 6. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 60495 For technical questions, please call 1-888-866-5797. Page 13...

  • Page 14: Parts List And Diagram

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 60495...
  • Page 15 Item 60495 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents