. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353.
When unpacking, check to make sure all the parts shown on the Parts List on page 11 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Do not use the power tool if the Trigger does not turn it on or off. Any tool that cannot be controlled with the Trigger is dangerous and must be replaced. For technical questions, please call 1-800-444-3353 SKU 94434 Electrical Safety Personal Safety...
Maintain labels and nameplates on this product. These carry important informa- tion. If unreadable or missing, contact Harbor Freight Tools for a replacement. When using the Cordless Drill, always maintain a firm grip on the tool with both hands.
Page 5
This is just an additional precaution; always check for hidden wiring before drilling. Do not use the Cordless Drill or Charger (26) if it has been dropped, damaged, left outdoors, or immersed in liquid. To avoid electrical shock, do not handle the Charger (26), its Power Cord Plug, or the Cordless Drill with wet hands.
(19) BATTERY PACk (22) WARNING! Always make sure the Trigger of the Cordless Drill is in its “OFF” position, the Battery Pack (22) is removed from the Cordless Drill, and the Charger For technical questions, please call 1-800-444-3353 SKU 94434...
Drill Bit with the Cordless Drill pointed away from your body, hold the Chuck Sleeve firmly in place and turn the Chuck clockwise. Insert the shank of a Drill Bit all the way into the Chuck. While holding the Chuck Sleeve in place, turn the Chuck coun- terclockwise to lock the Drill Bit in place.
Page 8
When drilling in light gauge metal or wood, use a wooden block to back up the material to prevent damage to the workpiece. Mark the center of the hole to be drilled with a center punch to give a Drill Bit a start and to prevent it from “walking”.
Make sure to hold the Cordless Drill firmly with both hands, as torque from the Mo- tor will cause the tool to twist. O b s e r ve t h e top of the Cordless Drill. (See Figure C.)
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of ninety days from the date of purchase.
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF RE- PLACEMENT PARTS THERETO. For technical questions, please call 1-800-444-3353 SKU 94434 PARTS LIST Qty. Part...
ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. For technical questions, please call 1-800-444-3353 SKU 94434 PAGE 12...