Chicago Electric 95877 Owner's Manual & Safety Instructions

Chicago Electric 95877 Owner's Manual & Safety Instructions

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
WITH KEYLESS CHUCK
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2007 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15a

Advertisement

Table of Contents
loading

Summary of Contents for Chicago Electric 95877

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
  • Page 2: Specifications

    Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system. Page 2 For technical questions, please call 1-888-866-5797. Item 95877...
  • Page 3: Personal Safety

    When servicing a product, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. Item 95877 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4: Specific Safety Rules

    Some examples of these chemicals are: • Lead from lead-based paints • Crystalline silica from bricks and cement or other masonry products • Arsenic and chromium from chemically treated lumber Page 4 For technical questions, please call 1-888-866-5797. Item 95877...
  • Page 5 The plug and outlet should look like those in the following illustration. (See 3-Prong Plug and Outlet, next page.) 3-Prong Plug and Outlet Outlets for 2-Prong Plug Item 95877 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 * Based on limiting the line voltage drop to five volts at 150% of the rated amperes. SYMBOLOGY Double Insulated Volts Alternating Current Canadian Standards Association Amperes No Load Revolutions per Minute n 0 xxxx/min. Underwriters Laboratories, Inc. (RPM) Page 6 For technical questions, please call 1-888-866-5797. Item 95877...
  • Page 7: Product Features

    Power Switch and then depress the Power Switch Lock. To release the Power Switch Lock, briefly squeeze and let up on the Power Switch. (See Figure A.) Item 95877 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 Remove the drill bit from the Drill Chuck (3). (See Figure A.) Make sure to store the Close Quarter Drill in a clean, dry, safe location out of reach of children and other unauthorized people. Page 8 For technical questions, please call 1-888-866-5797. Item 95877...
  • Page 9: Inspection, Maintenance, And Cleaning

    5. Clean or replace Carbon Brushes. Poor quality cut. 1. Dull Drill Bit. 1. Use sharp Drill Bit. 2. Applying too much pressure on 2. Apply less pressure on Drill. Drill. Item 95877 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10: Parts List

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 10 For technical questions, please call 1-888-866-5797. Item 95877...
  • Page 11: Assembly Diagram

    ASSEMBLY DIAGRAM Item 95877 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797 For technical questions, please call 1-888-866-5797. Page 12 Item 95877...

Table of Contents