Setting Up A Busy Signal When The Msn Is Being Used (Busy On Busy); Assigning An Msn A Ringer Melody - Gigaset SX100 isdn Instructions Manual

Setting the system

Setting up a busy signal when the MSN is being used (Busy on Busy)

This setting allows callers to get a busy signal immediately when an external call is
already being made on this MSN, independent of the setting Call waiting.
By factory default, the function is not set.
v
s
Base Settings
s
Settings
~
OK
s
ISDN settings
s
Busy on busy

Assigning an MSN a ringer melody

Each incoming MSN is assigned a ringer melody when setting up. You can change this
assignment for each incoming MSN individually. For an incoming MSN, you can
select one of the available ringer melodies. All handsets then ring with this ringer
◆
melody for an incoming call to this incoming MSN.
set the external ringer melody. Then the handsets assigned to the incoming MSN
◆
ring with the ringer melody set for external calls on the handset (page 139).
v
s
Base Settings
s
Settings
~
OK
s
ISDN settings
s
Set up MSN
s
v
r
Ringer Melody: 5
120
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 113).
Select the menu item and confirm.
OK
Select and confirm (
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 113).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select MSN, e.g. MSN1: Anna.
Open the submenu.
Select melody and confirm, e.g. Ringer Melody: 5
OK
‰
( = activated).
‰
= activated).