Gigaset SX100 isdn Instructions Manual page 101

Using several handsets
Activating the room monitor function and entering the 'call to' number for
the first time
v
s
Add. Features
Room Monitor
r
s
R[RRRRRRRRRRRRRRRRRRR]
Edit
either ...
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
INT
~
R[RRRRRRRRRRRRRRRRRRR]
Save
or ...
~
à
Save Entry
... then
s r
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
Save
Once the room monitor is activated, switch directly to the room monitor setting with v
(open menu).
◆
i
◆
100
Step 1: Open the input field for the room monitor:
Open the menu.
Select the menu item and confirm.
OK
Confirm. The input field is opened.
OK
Step 2: Activate room monitor:
In the Room M.: line, choose On.
Step 3: Enter the 'call to' number:
Scroll to the Call to: line and press the display key.
The input field for the phone number is opened.
Enter an internal phone number as the 'call to'
number:
Press the display key.
Enter the internal phone number and press the
display key. If the room monitor should call all
registered handsets, then enter P instead of an
internal phone number (group call).
Enter an external phone number as the 'call to'
number:
Enter the phone number.
Press the display key.
Confirm. The entry is stored.
OK
Step 4: Set the sensitivity:
If necessary, scroll to the Level: line and set the
sensitivity for the noise level (Low or High).
Press the display key. The room monitor function is
now activated.
If you would like to copy the external phone number from the
directory press the lower side of the control key s (open the
directory) while in the input field for the phone number. Use s to
select an entry and confirm with
If you enter an external phone number as the 'call to' number, only
the last 4 digits will appear in the input panel.
.
OK