Advertisement
2.
Set the desired drill torque by turning the Torque Selector to setting 1 to 6.
The higher the number, the more the torque. Use # 6 for drilling, and the others for
driving. Do this when the drill if off.
3.
Set the desired drill rotation by pressing the Rotation Switch (7) for drilling or driving;
Press Reverse for removing screws. Press Forward for drilling. Do this when the drill is
off.
4.
Press the Trigger Switch (5) in to turn the drill on.
The harder you press, the faster the rotation.
Chuck (8)
Torque Selector
Rotation Switch (7)
Trigger Switch (5)
1.
Use only sharp bits.
2.
Keep motor air vents clean of dust and debris. Vacuum periodically.
3.
Clean tool with a damp cloth and light detergent. Do not use solvents.
4.
Regularly charge batteries, whether used or not.
5.
Store Drill in a clean and dry area. Avoid storing in high temperature areas.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activites, contain chemicals known [to the State of California] to cause
cancer, birth defects or other reproductive harm. some examples of these chemicals
are:
- Lead from lead-based paints
- Crystalline cilica from bricks and cement or other masonry products
- Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially de-
signed to filter out microscopic particles. (California Health & Safety Code 25249.5, et
seq. )
SKU 40209
The item numbers (in brackets)
can be found on the Drill
Assembly and Drill Parts List.
Maintenance
Page 5
Advertisement
