Samsung SDM-090P User Manual page 40

SDM-090(P)
Digital Multiplexer
- The blinking indication moves if pressing " ", " " button.
- The setting value is changed if pressing " ", " " button.
- The changed setting value is stored if pressing the "SET" button. You can return to the
main menu.
REC TYPE : NOR TLV
¥ NOR : Used when connecting general VCR. Output is done in Field or Frame.
¥ TLV : Used when recording in the TLV mode by connecting the time lapse VCR.
- Output in the normal mode if no trigger signal exists though the setting is done in the TLV
mode.
REC OUT : FIELD FRAME : Effective menu if "REC TYPE" is "NOR".
¥ FIELD : Output in 1/60 second (NTSC), 1/50 second (PAL)
¥ FRAME: Output in 1/30 second (NTSC), 1/25 second (PAL)
- Reservation : ON OFF
- The following screen is displayed if pressing the "ENTER" button with the blinking
position placed at the "DUTY SET ....".
[REC DUTY SET]
CH1 : 1
CH3 : 1
CH5 : 1
CH7 : 1
CH9 : 1
¥ The blinking indication moves if pressing " ", " " button.
¥ The setting value is changed if pressing "
¥ The relevant channel is not recorded if the setting value is "OFF".
¥ The changed setting value is stored if pressing the "SET" button. You can return to
the main menu.
CH2 : 1
CH4 : 1
CH6 : 1
CH8 : 1
", "
5-2
" button:OFF,1~5.