Table of Contents
Advertisement
SDM-090(P)
Digital Multiplexer
When desiring to see in the zoom screen
When desiring to see in the PIP screen
The zoom screen operates if pressing "ZOOM" button in the FULL mode. The
mode is changed in the following order whenever pressing this button.
FULL MODE
Select the area to expand using the "MOVE" (
Moving to the diagonal direction is allowed using the double button (right upper, left
below, right upper, right below).
The "ZOOM" button does not operate in the following cases:
- In division screen mode
- In setting division screen
- In setting of program mode
- In displaying ALARM LIST on screen
The PIP (picture in picture) screen may be seen using the "PIP" button on the
FULL screen in the LIVE mode. The size of the PIP sub-screen is set in the "PIP
SIZE" of the "2. MON OUT SET" on the program menu. The sub-screen is
automatically and sequentially converted if pressing the "SEQUENCE" button.
Method to use
1. Press the "PIP" button.
2. Press the "SET". In this case the LED of the "SET" button blinks and the
border line blinks.
Then, set the sub-screen of the PIP screen to a desired channel.
3. Press the "SET" button if completing the channel setting. In this case the
LED of the "SET" button turns off.
4. Fix the position of the sub-screen using the "MOVE" button. The position of
the sub-screen may be selected in 4 cases of right upper, left below, right
upper, right below.
2TIMES
4 TIMES
ZOOM
ZOOM
,
4-6
FULL MODE
,
,
) button.
Advertisement
Table of Contents
