4.8.99
Putting the equipment into operation - step by step
Telephone connecting cable
Power connecting cable
4th step: inserting the batteries in the mobile unit
Battery compartment
2
kap02.fm4
Insert the Mini-Western plug of the telephone connecting
cable in the base station. The jack on the lower part of the
base station housing has the following symbol:
Connect the telephone plug of the telephone connecting
cable to the telephone socket.
Insert the Mini-Western plug of the power connecting
cable in the base station. The jack on the lower part of the
base station housing has the following symbol:
Connect the power supply unit of the power connecting
cable to a 220/230V socket.
The mobile unit is powered by two batteries.
.
Cover of battery
compartment
and batteries
Hold the mobile unit with the keypad downwards.
Insert the batteries in the battery compartment.
Slide the cover for the battery compartment into the
groove on the mobile unit and close the compartment.
Gigaset 2015, GBR: A30852-X-1105-B301-1-7619
Make sure that the batteries have the correct
+/– polarity. The +/– markings on the batteries
must correspond to the +/– markings on the
label in the battery compartment.
If the batteries are aligned wrongly, the mobile
unit will not function and the equipment is liable
to be damaged.
If you wear a hearing aid, please note before
using the telephone that radio signals can inter-
fere with hearing aids and, if sufficiently loud,
can cause a very unpleasant humming noise.