Security Settings; To Change The System Pin; Defining Authorizations - Gigaset 4170 isdn Operating Instructions Manual

Security settings

Step
by
Step

To change the system PIN

With the system PIN (Personal Identification Number) you can enter the follow-
ing settings in the base station to prevent unauthorised access:
G →
G →
G →
G →
G →
G →
The system PIN only takes effect if it is ≠ 0.
PIN number 0000 is assigned to your Gigaset 4170/4175isdn on delivery.
Press G for selection menus.
1.
Select using [
2.
Only for system PIN ≠ 0000: Enter system PIN and confirm with [OK].
3.
Select using [
4.
Repeat the new base PIN (max. 8 digits) and confirm with [OK].
5.
Repeat the new base PIN and confirm with [OK].
6.

Defining authorizations

It is possible to set different authorizations for all registered devices:
1. Unrestricted
(Default setting)
All devices can accept incoming calls and make outgoing external/internal
calls.
2. Incoming only
The devices can only accept incoming calls. External calls cannot be made.
Internal calls may be made.
Emergency numbers may be dialled.
3. Internal only
The devices can only accept and handle internal calls.
Calls to the emergency services can be made.
Press G for selection menus.
1.
Select using [
2.
Only for system PIN ≠ 0000: Enter the system PIN and confirm with [OK].
3.
Select using [
4.
→ (desired authorization,
Costs
→
Base Settings Ext. call forw.
→
Base Settings Int. call forw.
→
Base Settings Night service
→
Base Settings Settings
→
Base Settings Installation
Á
] and [OK]: Base Settings
Á ] and [OK]: Change
Note the new base PIN carefully. If you forget your PIN, the device will
need to be opened. In this case, contact the Siemens Hotline.
Á
] and [OK]: Base Settings
Á ] and [OK]: Authorisation
→
Settings
PIN.
→
Settings
→ (desired internal subscriber) → [
before menu command = ON / no = OFF).
Security settings
→ Security.
→ Security.
W
]
69