A- Media Loading Orientation - Polaroid P100I User Manual

Polaroid
General Information
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
42
A.·MEDIA LOADING ORIENTATION
STRIPE
DOWN
STRIPE
UP
NOTE:
M1 = Stripe Down HICO
M2 = Stripe Down LOCO
Approved HICO & LOCO PVC cards are available. (See Appendix C).
ONLY USE cards that comply with ISO 7810 &
7811 standards for magnetic stripe cards. The
magnetic stripe must be flush to the surface of
the card to work properly. Never use taped-on
magnetic stripes.
P100i
User's Manual
The magnetic encoder is a factory installed
item with the read/write head positioned below
the card path, available with HICO encoding
(P100i CM1 or P100i CEM1) or LOCO
encoding (P100i CM2 or P100i CEM2).
When loading cards into the Card Cartridge,
please ensure that the magnetic stripe is facing
down and closest to the rear.
Also available are Printer models with the
Magnetic Read/Write head positioned above
the card path, with HICO encoding (P100i CM3
or P100i CEM3) or LOCO encoding (P100i
CM4 or P100i CEM4)
When loading cards, please ensure that there
is a magnetic stripe.
M3 = Stripe up HICO
M4 = Stripe up LOCO