Gigaset SX553 WLAN dsl First Steps page 84

Configuring the Advanced Settings
Super G (108 Mbit/s)
With the help of channel bundling, the
data transfer up to 108 Mbps. The channel for wireless data transfer cannot be changed.
You can only use Super G if this function is supported by at least one client in your wire-
less network. For the best possible data transfer rates, all clients in your LAN should sup-
port Super G.
Please remember:
If you activate Super G as the transmission mode, but it is not supported by all
components in your wireless network, then for technical reasons the transfer rate in
the network may be significantly lower than the possible maximum of 108 Mbit/s.
ì
Select the mode for using Super G (108 Mbit/s) for your wireless network to
increase the data transfer rate. You have a choice of two modes.
– Static: Wireless transmission is at a rate of just 108 Mbps. Clients that do not sup-
port this speed cannot connect to the access point.
– Dynamic: If you select this transmission mode, the router accepts participants
that communicate at different transfer rates and adjusts to the slowest client in
the network.
ì
If you want to use Super G (108 Mbit/s), select the required mode from the selec-
tion menu.
In the default setting, Super G (108 Mbit/s) is deactivated.
82
Super G transmission mode enables wireless