Gigaset SX553 WLAN dsl First Steps page 52

Security settings
Entering MAC addresses manually
ì
Enter the MAC address of the network adapter. You will find this address on the bot-
tom of the device.
ì
Enter the name of the PC.
ì
Click the Add button to add the entry to the list.
Selecting from the list of logged-in PCs
ì
Select the required PC from the Known wireless clients list. All PCs that are cur-
rently logged on to the router with the correct SSID are displayed.
ì
Click the Add button to add the selected PC to the list.
Note:
If you activate MAC access control, you must at least enter the PC on which you
are configuring the Gigaset SX553 WLAN dsl. Otherwise you will have no access
to the user interface and will receive a corresponding error message.
If you have inadvertently denied all PCs access to the Gigaset SX553 WLAN dsl,
you have two options:
u
You can completely reset the Gigaset SX553 WLAN dsl (see page 20).
u
You can connect a PC to the Gigaset SX553 WLAN dsl using one of the LAN
connections (by cable). As MAC access control only affects PCs that are con-
nected wirelessly, you can use this PC to change the configuration.
ì
To go to the next step, click Next >.
50