Listening To Voice Mail Messages - Panasonic KX-TG5561 Operating Instructions Manual

TG5561_5566.book Page 61 Thursday, April 7, 2005 12:07 PM
4
Push the joystick up or down repeatedly
to select "On" or "Off".
5
Press {SAVE}, then press {OFF}.
Listening to Voice Mail
messages
The unit will let you know that you have
new Voice Mail messages in the following
ways:
– The VM indicator on the base unit will
flash.
– "Voice Mail" will be displayed on the
handset.
– The message indicator on the handset
will flash slowly if message alert feature
is turned on.
Note:
L If your Voice Mail service uses Voice
Mail tones and the message is over 3
minutes long, the handset may not
indicate new messages.
L If your Voice Mail service uses Voice
Mail tones, the tones will be heard from
any phone connected to the same line. If
you want to use another phone to listen
to Voice Mail messages, you have to dial
your access number manually.
Listening to messages using the
handset
1
Press {C} or {s}, then press {VM}
within 15 seconds.
L If {VM} is not displayed, the Voice
Mail access number has not been
stored. Store the number (page 60).
OR
Press {MENU} (center of the joystick),
then press {VM}.
L The speakerphone will turn on.
L If the handset beeps 3 times, the
Voice Mail access number has not
been stored. Store the number (page
60).
2
Follow the pre-recorded instructions.
For assistance, please visit http://www.panasonic.com/consumersupport
Voice Mail Service
3
Press {OFF} when finished.
Note:
L If "Voice Mail" still remains on the
display even after you have listened to
new messages, turn it off by pressing
and holding {OFF} until the handset
beeps.
Listening to messages using the base
unit
1
Press {VM}.
L If the base unit beeps 3 times, the
Voice Mail access number has not
been stored. Store the number (page
60).
L The speakerphone will turn on.
2
Follow the pre-recorded instructions.
3
Press {SP-PHONE} when finished.
Note:
L If the VM indicator still flashes even after
you have listened to new messages,
turn it off by using the handset. Press
and hold {OFF} until the handset beeps.
61