Panasonic Diga DMR-EX88 Operating Instructions Manual page 67

Quick Start
1 Sec. Quick Start for Recording & EPG Display
(When connecting to TV using 21-pin Scart, COMPONENT
VIDEO, VIDEO or S VIDEO terminals)
From the power on, recording on DVD-RAM and HDD starts in
about 1 second after the REC button is pressed. If the GUIDE
button is pressed while the unit is off, the Electronic Program
Guide (EPG) displays in less than 1 second. (Quick Start Mode)
[On]
[Off] Standby power consumption is less than when this is set to
"On".
(If this is set to "On", "Power Save" is automatically turned to "Off".)
≥Startup takes up to a minute when:
– You play a disc or start recording to discs other than DVD-RAM.
– You want to make other operations.
– The clock has not been set.
≥Depending on the type of TV or the connected terminal, it may
take time to display the screen.
DivX Registration
You need this registration code to purchase and play DivX Video-
on-Demand (VOD) content (➡ 33).
System Update
In order to update this unit's software, the TV Guide download,
and to support system changes made by broadcasts, this unit
periodically performs software updates.
Press [OK] to show the following settings.
≥Update data and TV Guide download information is sent by an
unscheduled digital broadcast. In order to receive these updates,
you must be able to receive digital broadcasts.
≥An update will take approximately 60 minutes. While the update
is in progress, "SW-DL" appears on the unit's display. You cannot
operate the unit until the update is complete. Removing the AC
mains lead while the update is in progress may damage the unit.
≥TV Guide download will take approximately 60 minutes. While
the TV Guide download is in progress, "GUIDE" appears on the
unit's display. The TV Guide download can be interrupted by
switching on the unit.
TV Guide Download in Standby
[On] When you set this unit to standby mode, TV Guide data
is downloaded automatically.
[Off]
≥In the area where GUIDE Plus+ system is available, the setting
is fixed to "On" automatically.
Software Update in Standby
[On] When you set this unit to standby mode, software
updates are downloaded automatically.
[Off]
TV Guide/Software search period
Selects the time to automatically perform TV Guide download
and updates when the unit is set to standby mode. This can only
be set when "TV Guide Download in Standby" and "Software
Update in Standby" is set to "On".
≥If there is a programmed recording set for the time you have
selected, the programmed recording will be given priority.
In the area where GUIDE Plus+ system is not available:
§
[Automatic]
[02:00–06:00] [06:00–10:00]
[14:00–18:00] [18:00–22:00]
In the area where GUIDE Plus+ system is available:
§
[Daytime] (06:00-22:00)
[Automatic]
§
The unit will give priority to searching for TV Guide download
and update data at midnight.
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not turn
your unit off during the update. This could result in the loss of
data. A message shows that the update has finished.
If a new software version is not going to be broadcast for the next
few days, a corresponding message also appears.
≥If applicable update data is found, press [2, 1] to select "Yes"
and press [OK].
[10:00–14:00]
[22:00–02:00]
[For]Germany,[Italy,[and[Spain]
GUIDE Plus+ Data Download Now
Start downloading GUIDE Plus+ data.
≥If this is performed in standby mode for timer recording, timer
recording may not work correctly.
[For]Germany,[Italy,[and[Spain]
GUIDE Plus+ System Information
You can check the condition of GUIDE Plus+ system of this unit.
[For]Germany,[Italy,[and[Spain]
Post Code
You can input the postal code which is necessary to download
area specific information of GUIDE Plus+ system.
Initialize
≥Press [OK] to show the following settings.
Shipping Condition
All the settings except for the ratings level, ratings password and
clock settings return to the factory preset. The timer recording
programmes are also cancelled.
[Yes] [No]
Default Settings
All the settings other than the tuning settings, clock settings,
country settings ([For]France,[Italy,[Spain[and[Switzerland]),
language settings, disc language settings, ratings level, ratings
password, remote control code, return to the factory presets.
[Yes] [No]
List of TV Reception Channels
Tuner Channel VHF
System Coverage
PAL-BGH CCIR E2 – E12
SECAM-BG A – H2
(Italy)
SECAM-LL' France 2 – 10
DVB-T Germany 5 – 12
France 5 – 10
Italy D – H2
Spain 5 – 12
Switzerland 5 – 12
UHF CATV
21 – 69 S01 – S05
(S1 – S3)
S1 – S20
(M1 – U10)
S21 – S41
21 – 69 B – Q
(100.5 – 299.5
MHz)
S21 – S41
(299.25 –
467.25 MHz)
21 – 69 —
21 – 69
21 – 69
21 – 69
21 – 69
RQT9079
67