Panasonic Diga DMR-EX88 Operating Instructions Manual page 62

Changing the unit's settings
Signal Condition
You can check the quality and strength of digital broadcast signals.
Realign the aerial if you are receiving a poor signal.
When "Signal Condition" is displayed in grey and cannot be
selected:
1 Press [EXIT] to exit the screen.
2 Press [W X CH] to select a digital channel. "D" appears on the
unit's display.
3 Display the Setup menu again (➡ 61).
Press [3, 4] to select "Signal Condition" and press [OK].
The quality and strength of the signal are shown.
Press [W X CH] to select the channel.
Signal Quality 0
Signal Strength 0
RETURN
Signal Quality
Below 2 (display red):
The signal quality is so poor that there may be interference in the
pictures and sound.
2–5 (display orange):
The signal quality is basically adequate, but brief interference in the
pictures and sound is possible in isolated case.
Over 5 (display green):
Optimum picture and sound quality.
Signal Strength
The display for signal strength is grey. "0" means signal strength 0%,
"10" means signal strength 100%.
If the signal is too strong, the display will change from grey to red.
Reduce the signal amplification at your aerial.
≥When the signal is weak:
– adjust the position and direction of the aerial.
– adjust the aerial reception with "DVB Manual Tuning" in the
Setup menu (➡ 61).
– check that the current digital broadcast channel is correctly
broadcasting.
DVB Preferred Language
Press [3, 4] to select "DVB Preferred Language" and press [OK].
You can select up to 2 different subtitles
([For]France,[Italy,[Spain[and[Switzerland]) and audio tracks to be used
when audio and subtitles digital broadcasts are received. Select the
order of priority.
If the selected language is not available, then the original language
will be selected.
Multi-Audio
Multi-Audio (alternative)
[For]Germany[
[English] [German]
[Spanish]
[For]France,[Italy,[Spain[and[Switzerland]
[English] [German]
[Spanish] [Catalan]
[Corsican]
[For]France,[Italy,[Spain[and[Switzerland]
Subtitle
Subtitle (alternative)
[English] [German]
[Spanish] [Catalan]
[Corsican]
∫ Settings for Analogue Services
Press [OK] to show the following setting.
Manual Tuning
You can delete analogue channels and set the analogue channel
details.
Press [OK] to show Manual Tuning screen.
Manual Tuning
Pos Name Ch Pos Name
1 ARD 4 11
2 ZDF 2 12
3 N3 5 13
4 HR3 8 14
5 BR3 10 15
6 16
7 17
SELECT
8 18
OK
9 19
RETURN
10 20
Delete
To delete a programme position
RQT9079
Press [3, 4, 2, 1] to select a programme position and press the
62 "Red" button.
10
10
CH +
CH –
[Italian] [French]
[Italian] [French]
[Basque] [Galician]
[For]France,[Italy,[Spain[and[Switzerland]
[Italian] [French]
[Basque] [Galician]
Ch
[Note]
≥[For]Germany[ This unit does not support SECAM L, L'.
To change the tuning settings for individual programme
position
1 Press [3, 4, 2, 1] to select a programme position and press
[OK].
[For]Germany[
Pos 901
Manual
Name ARD
Tuning
Channel 4
Fine Tuning Auto
Video System
Auto
Off
Mono
SELECT
Title Page 301
RETURN
RETURN : leave
2 Press [3, 4] to select an item and press [1].
Pos Programme position in the table
(You cannot change the programme position.)
Name To enter or change the name of a TV
station
Press [3, 4, 2, 1] to enter station name
and press [OK].
If the station name needs a blank space,
select the blank between "Z" and "¢".
Channel To enter newly available TV stations or
change the channel number of an already
tuned TV station
Press [3, 4] or the numbered buttons to
enter the channel number of the desired TV
station.
Wait a few moments until the desired TV
station has been tuned.
After the desired TV station is tuned, press
[OK].
Fine Tuning To obtain the best tuning condition
Press [3, 4] to adjust the best tuning
condition and press [OK].
≥Press [1] to return to "Auto".
Video System To select the video system type
Press [3, 4] to select "PAL" or "SECAM" if
the picture lacks colour, and press [OK].
≥Auto
This unit automatically distinguishes PAL
and SECAM signals.
≥PAL
For receiving PAL signals.
≥SECAM
For receiving SECAM signals.
Audio Mode To select the audio reception type
If sound quality is poor, press [3, 4] to select
[For]France,[Italy,[
[Spain[and[
"BG" or "L" and press [OK].
≥BG
[Switzerland]
PAL B.G.H/SECAM B.G
≥L
SECAM L, L'
Mono To select the type of sound to be recorded
Press [3, 4] to select "On" if the stereo
sound is distorted due to inferior reception
conditions, or if you want to record the normal
(mono) sound during a stereo, bilingual or
NICAM broadcast, and press [OK].
Title Page To enter the Teletext title page for a
channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [3, 4] or numbered buttons to enter
the number and press [OK].
≥To find the correct title page for the station,
refer to its Teletext TV guide.
[For]France,[Italy,[Spain[and[
[Switzerland]
Pos 901
Manual
Name ARD
Tuning
Channel 4
Fine Tuning Auto
Video System Auto
Audio Mode
BG
SELECT
Mono Off
Title Page 301
RETURN
RETURN : leave