Using On-Screen Menus/Status Message - Panasonic Diga DMR-EX88 Operating Instructions Manual

Using on-screen menus/Status message

Using on-screen menus
Common procedures
1
Press [DISPLAY].
Disc
Soundtrack
Play
Subtitle
Picture
Audio channel
Sound
Other
Menu
≥Depending on the condition of the unit (playing, stopped,
etc.) and disc contents, there are some items that you
cannot select or change.
2
Press [3, 4] to select the menu and
press [1].
3
Press [3, 4] to select the item and
press [1].
4
Press [3, 4] to select the setting.
≥Some items can be changed by pressing [OK].
To clear the on-screen menus
Press [DISPLAY].
Disc menu—Setting the disc content
§
Soundtrack
[HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
The disc's audio attributes appear.
[DVD-V]
Select the audio and language (➡ right, Audio attribute,
Language).
[VCD] (SVCD) and DivX
Select the soundtrack number.
≥Soundtrack numbers are displayed even when there is only
one audio type.
§
Subtitle
[DVD-V]
Turn the subtitle on/off and select the language (➡ right,
Language).
[HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›] (Only
discs that contain subtitle on/off information)
Turn the subtitle on/off.
≥Subtitle on/off information cannot be recorded using this unit.
[VCD] (SVCD) and DivX
Turn the subtitle on/off and select the subtitle number.
≥Subtitle numbers are displayed even if there are not multiple
subtitles.
[DVD-V]
§
Angle
Change the number to select an angle.
Audio channel [HDD] [RAM] [-RW‹VR›] [VCD] and DivX
(➡ 30, Changing audio during play)
Source Select (DivX)
≥Automatic:
The constructing method of the DivX contents is
automatically distinguished and output.
≥Interlace:
Select when the disc contents were recorded using
interlace.
≥Progressive:
Select when the disc contents were recorded using
progressive.
PBC (Playback control ➡ 84) [VCD]
Indicates whether menu play (playback control) is on or off.
§
With some discs, you may only be able to make changes using
the menus (➡ 17) on the disc.
≥The display changes according to the disc content. You cannot
change when there is no recording.
RQT9079
56
§ Digital 2/0 ch
1
Off
L R
Item Setting
Audio attribute
LPCM/ÎDigital/DTS/MPEG:
k (kHz):
b (bit):
ch (channel):
Language
ENG: English DAN: Danish
FRA: French POR: Portuguese
DEU: German RUS: Russian
ITA: Italian JPN: Japanese
ESP: Spanish CHI: Chinese
NLD: Dutch KOR: Korean
SVE: Swedish MAL: Malay
NOR: Norwegian VIE: Vietnamese
Play menu—Change the play sequence
This function works only when the elapsed play time is displayed.
Select the item for repeat play. Depending on the disc, the items that
can be selected will differ.
Repeat Play
≥All [CD] [VCD]
≥Chapter [HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
[+RW] [DVD-V] [-RW‹VR›]
≥Group MP3 (except [USB])
≥PL (Playlist) [HDD] [RAM] [-RW‹VR›]
≥Title [HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
[+RW] [DVD-V] [-RW‹VR›]
≥Track [CD] [VCD] and MP3 (except [USB])
Select "Off" to cancel.
Picture menu—Change the picture quality
Playback NR
Reduces noise and picture degradation.
§
Progressive (➡ 84)
Select "On" to enable progressive output.
Select "Off" if the picture is stretched horizontally.
§
Transfer [When "Progressive" (➡ above) is set to "On".]
Select the method of conversion for progressive output to suit
the type of title being played (➡ 84, Film and video).
When the output signal is PAL
(When the tray is opened, the setting will return to "Auto".)
≥Auto:
Automatically detects the film and video
content, and appropriately converts it.
≥Video:
Select when using "Auto", and the content is
distorted.
≥Film:
Select this if the edges of
the film content appear
jagged or rough when
"Auto" is selected.
However, if the video
content is distorted as
shown in the illustration
to the right, then select "Auto".
When the output signal is NTSC
≥Auto1
Automatically detects the film and video
(normal): content, and appropriately converts it.
≥Auto2:
In addition to "Auto1", automatically detects
film contents with different frame rates and
appropriately converts it.
≥Video:
Select when using "Auto1" and "Auto2", and
the content is distorted.
Input NR
Reduces the noise while recording (Except analogue
channels).
≥Automatic:
Noise reduction only works on picture input from a video tape.
≥On:
Noise reduction works for input video.
≥Off:
Noise reduction is off. You can record the input signal as it is.
§
Only when you have set "Progressive" to "On" in the Setup menu
(➡ 65).
Signal type
Sampling frequency
Number of bits
Number of channels
THA: Thai
POL: Polish
CES: Czech
SLK: Slovak
HUN: Hungarian
FIN: Finnish
¢:
Others