Setting The Am Tuning Step; Switching The Flap Auto Open - Pioneer DEH-P8450MP Operation Manual

Section
Initial Settings
08
3 Select the FM tuning step with 2/3.
Pressing 2/3 will switch the FM tuning step
between 100 kHz and 50 kHz. The selected FM
tuning step will appear in the display.
Note
• If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune in
the stations with manual tuning or use seek
tuning again.

Setting the AM tuning step

The AM tuning step can be switched between 9
kHz, the preset step, and 10 kHz. When using
the tuner in North, Central or South America,
reset the tuning step from 9 kHz (531 – 1,602
kHz allowable) to 10 kHz (530 – 1,640 kHz allow-
able).
1 Press
OPEN
2 Press
FUNCTION
Press
FUNCTION
play.
3 Select the
AM
Pressing 2/3 will switch the AM tuning step
between 9 kHz and 10 kHz. The selected AM
tuning step will appear in the display.
44 En
to open the front panel.
to select
AM STEP
until appears in the dis-
AM
tuning step with 2/3.
Switching the warning tone
If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press
2 Press
Press
FUNCTION
display.
3 Select
Pressing 5/∞ will switch
and off and that status will be displayed (e.g.,
Warning :ON

Switching the flap auto open

For theft protection, the front panel opens auto-
matically and easily detaches. Flap auto open is
on as a default.
.
1 Press
2 Press
Press
FUNCTION
display.
3 Select
Pressing 5/∞ will switch
and off and that status will be displayed (e.g.,
Flap Auto :ON
to open the front panel.
OPEN
to select
FUNCTION WARN
until appears in the
WARN
on or off with 5/∞.
WARN
Warning
).
to open the front panel.
OPEN
to select
FUNCTION D OPEN
until appears in the
D OPEN
on or off with 5/∞.
Flap Auto
Flap Auto
).
.
between on
.
between on