Remote Control - Pioneer VSX-C501-S Operating Instruction

Controls and displays
04

Remote control

Function names printed in green on the remote control
are receiver-related functions. Function names printed in
blue are for the built-in tuner (see Using the tuner on
page 30). Other functions relate to other equipment that
you can control using this remote. See also Controlling
other equipment on page 38.
1
3
5
7
8
9
10
12
13
15
16
18
19
20
1 RECEIVER
Press to put the remote in 'receiver' mode (i.e., the
remote controls the receiver functions).
2 LED
Indicates a remote control operation.
3 RECEIVER
Press to switch the receiver on or into standby.
4 SOURCE (page 38)
Press to switch the current source component on or into
standby.
22
En
RECEIVER
RECEIVER
SLEEP
DVD TV/SAT DVR/VCR
INPUT VIDEO FRONT FM/AM
CH SELECT LEVEL TEST TONE
ADVANCED
AUTO STEREO SURROUND
SURROUND
SOUND SIGNAL
MODE DIALOG SELECT
11
MUTE
MASTER
VOLUME
MCACC SYSTEM
14
SETUP SETUP
TUNE
DTV MENU T.EDIT
TOP MENU MENU
ST ST
ENTER
GUIDE
AUDIO SUBTITLE
TUNE
17
SBch MODE DIMMER
RETURN BAND DTV ON/OFF DTV INFO
DISPLAY CLASS MPX D.ACCESS
DISC
ENTER
10
TV CONTROL
21
CHANNEL INPUT CHANNEL VOLUME
RECEIVER
5 SLEEP (page 32)
Use to set the sleep timer.
6 Input/remote control mode select buttons
(page 26)
When the Remote Direct function is set to on, these
buttons (except FM/AM) change the remote mode and
the receiver input simultaneously. When set to off, they
only switch the remote mode (see also Remote Direct
function on page 39).
2
DVD
4
Press to select DVD as the current input.
TV/SAT
6
Press to select TV/SAT (sattellite tuner) as the
current input.
DVR/VCR
Press to select DVR/VCR as the current input.
FRONT
Press to select FRONT (the front panel audio/video
inputs) as the current input.
FM/AM
Press to select FM/AM (the built-in tuner) as the
current input.
7 INPUT
Press to cycle through the various inputs. The current
input is shown in the front panel display.
8 Channel setup buttons (page 37)
CH SELECT
Use to select the speaker channel to adjust.
LEVEL +/–
Use to adjust the output level of the current speaker
channel.
TEST TONE
Press to start/stop the test tone.
9 Sound buttons
AUTO (page 27)
Press to select the AUTO (default) sound for the
current source (stereo, Dolby Digital, DTS, etc.) and
switch off all other sound processing.
STEREO (page 27)
Press to hear the current source in stereo.
SURROUND (page 27)
Use to select a SURROUND mode for the current
source.
ADVANCED SURROUND (page 28)
Use to select an ADVANCED SURROUND mode for
the current source.