Controls And Displays; Front Panel - Pioneer VSX-C501-S Operating Instruction

Controls and displays

04
Chapter 4
Controls and displays

Front panel

1 2
STANDBY/ON
PULL-
OPEN
1 Front panel connections cover
Pull where indicated to access the front panel
connections (SETUP MIC/PHONES jack, FRONT INPUT
jacks).
2 STANDBY/ON button
Press to switch the receiver on or into standby.
3 STANDBY
Lights when the receiver is in standby.
4 Digital surround format indicators
2 DIGITAL indicator
Lights when the current source is Dolby Digital.
DTS indicator
Lights when the current source is DTS.
5 Listening mode indicators
2 PRO LOGIC II indicator (page 27)
Lights when one of the Dolby Pro Logic II surround
modes is active with a 2 channel (stereo) source.
NEO:6 indicator (page 27)
Lights when the Neo:6 listening mode is active with a
2 channel (stereo) source.
ADVANCED indicator (page 28)
Lights when one of the Advanced Surround modes is
active.
PHONES indicator (page 28)
Lights when phones surround mode is active.
SOUND MODE indicator (page 28)
Lights when one of the Sound Modes is active.
6 Remote control sensor
7 INPUT SELECTOR knob (page 26)
Turn to cycle through the various inputs. The current
input is shown in the front panel display.
20
En
3 4 5
2 2
STANDBY DIGITAL DTS PRO LOGICII NEO:6 ADVANCED
8 MASTER VOLUME knob
Use to adjust the volume.
6 7
MASTER
PHONES SOUND MODE INPUT SELECTOR VOLUME
DOWN
8
UP