Basic Play - Panasonic DVD-S1 Operating Instructions Manual

Basic play

Power ON.
Load the disc.
•
Load double-sided discs so the label for the side you want to play is
facing up.
Skip
•
Press [u i] to skip chapters or tracks.
Stop
The position is memorized when "RESUME STOP" is
displayed on your television screen.
•
Press [q] (PLAY) to resume.
•
Press [g] to clear the position.
Standby/on switch (8)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the
unit is still consuming a small amount of power.
Standby/on indicator (^)
When the unit is connected to the AC mains supply, this indicator lights up in standby
mode and goes out when the unit is turned on.
8
Open the disc
tray.
The United Kingdom and
Display
Continental Europe
PLAY
QUICK OSD
MODE FL SELECT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
MENU
TOP MENU
ENTER
FUNCTIONS RETURN
QUICK
•
SETUP ZOOM REPLAY CM SKIP
Discs continue to rotate while menus are displayed. Press [g] when you finish to
preserve the unit's motor and your television screen.
•
Total title number may not be displayed properly on 4R/4RW.
If you are experiencing problems, refer to troubleshooting guide (è page 17, 18).
Remote control sensor
Start play.
Search
(during play)
Slow-motion
•
Up to 5 steps
•
Press [q] (PLAY) to restart play.
•
Slow-motion, forward direction only
VCD
Pause
•
Press [q] (PLAY) to restart play.
Except the United Kingdom
and Continental Europe
•
When the unit is switched
off, the light goes off.
•
When there is no disc or
during loading, the indicator
blinks every 0.5 sec.
•
The indicator lights up
during play.
•
When the disc cannot be
read, the indicator blinks
every 0.25 sec.
(during pause)