Table of Contents
Advertisement
SD/Multi Media Card
An SD/Multi Media card can be used for the following purposes.
The exchange of data with various devices equipped with an SD/Multi Media card slot,
audio storage, and so on.
NOTE
Software (e.g., drivers) required to exchange data with these devices. (Refer to the
instructions manual provided with each SD compatible peripheral device.)
Use as a memory card (e.g., use as a storage unit on which files can be written).
Installing/Removing an SD/Multi Media Card
1
Open the SD/Multi Media card slot cover.
2
Installing
Slide the card in until it snaps into place as shown in the
illustration.
Make sure the labeled face of the SD/Multi Media card is
towards the front of the computer and then firmly insert
the card. If you mistaken the back side of the card with
the top surface side, the card cannot be inserted all the
way into the slot.
Do not insert the card at an angle.
Insert the card all the way into the slot.
Removing
(1) Press the card. It will come out slightly.
(2) Remove the card.
3
Close the SD/Multi Media card slot cover.
CAUTION
Before removing an SD/Multi Media card or powering off the computer, check to see if
the computer is trying to access the card. Such accesses are done intermittently for a
short period of time. Be sure to remove the card or power off the computer only after
confirming that the computer is not trying to access the card. If the card is removed or the
computer is powered off during an access attempt, valuable data may be lost or the com-
puter may fail to work properly.
22
SD/Multi Media Card Slot
Advertisement
Table of Contents
