Disc Information - Panasonic DVD-RV41 Operating Instructions Manual

A
a
b
c
B
d
e
2
3
4
C
f
g
2
3
4
2
3
ALL
4

Disc information

Discs that can be played
Region
Disc type Logo
number
See below
DVD-Video
for details.
Video CD –
–
Audio CD
Region Management Information (DVD only)
Region numbers are allocated to DVD players and software accord-
ing to where they are sold.
For the United Kingdom and Continental Europe : "2"
For Australia and N.Z. : "4"
For Asia : "3"
DVDs can be played on this unit if their region number is the same or
includes the same number, or if the DVD is marked "ALL".
Confirm the region number for this unit before choosing discs. The
number for this unit is indicated on the rear panel of the unit.
(Back of the unit) Disc
Discs that cannot be played
DVD-Audio, DVD-ROM, DVD-R/DVD-RAM, CD-ROM, VSD, CDV,
CD-G, +RW, DVD-RW, CVD, SVCD, SACD, Divx Video Discs and
Photo CD.
DVDs that can be played
This unit has a Dolby Digital decoder so you can play DVDs with
this mark.
This unit does not have a DTS decoder. Connect this unit to
equipment that has a DTS decoder to enjoy DVDs with this mark.
Type of disc for the type of connected TV
DVDs and Video CDs are recorded using either PAL or NTSC.
Refer to this table when selecting discs.
For the United Kingdom,
TV type Disc
Continental Europe,
Australia and N.Z.
PAL
Multi-
system TV
NTSC
PAL
NTSC TV
NTSC
PAL
PAL TV
NTSC
1 If you select "NTSC" in "NTSC Disc Output" (á page 22), the
picture may be clearer.
2 The factory preset for "NTSC Disc Output" is "PAL60", so no
changes to the initial settings are necessary.
(If your television is not equipped to handle PAL 525/60 signals the
picture will not be shown correctly.)
3
The factory preset for "NTSC Disc Output" is "NTSC", so no
changes to the initial settings are necessary.
4
Select "PAL60" in "NTSC Disc Output" (á page 22).
(If your television is not equipped to handle PAL 525/60 signals the
picture will not be shown correctly.)
Note
When a disc which does not comply with Video CD standard is
played, the bottom part of the picture may disappear.
Playing DVDs and Video CDs
The producer of the material can control how these discs are played.
This means that you may not be able to control play of a disc with
some operations described in these operating instructions. Read the
disc's instructions carefully.
Indication
Video
used in
system
instructions
PAL/NTSC
[DVD]
PAL/NTSC
–
TV Monitor
For Asia
1
3
2 4
RQT5869
5