Digital Output; Entering A Password - Panasonic DVD-RV41 Operating Instructions Manual

Digital output

Refer also to "Common procedures" (á page 21) and the Audio menu
in "Summary of initial settings" (á page 22).
PCM Down Conversion
No (Factory preset):
When you have connected an amplifier with audio cables.
Yes:
When you have connected an amplifier with an optical digital audio
cable.
Copyright protection limits digital output to 48 kHz/16 bit.
When playing DVDs recorded in 96 kHz
Sound is output as follows in accordance with the connections and
settings you have made.
Setting
Digital
No output (If there is no
No copyright protection, audio is
output at 96 kHz. 1
Converted and output as 48
Yes
kHz/16 bit
1 The connected equipment must be able to handle 96-kHz LPCM in
order to take advantage of high quality audio found on these discs.
Dolby Digital
Bitstream (Factory preset):
When you have connected a unit with a built-in Dolby Digital decoder.
PCM:
When you have connected a unit that doesn't have a built-in Dolby
2
Digital decoder.
DTS Digital Surround
Off (Factory preset):
When you have connected a unit that doesn't have a built-in DTS
decoder. 2 (No digital signal is output.)
Bitstream:
When you have connected a unit with a built-in DTS decoder.
MPEG
(For the United Kingdom, Continental Europe,
Australia and N.Z.)
PCM (Factory preset):
When you have connected a unit that doesn't have a built-in MPEG
decoder. 2
Bitstream:
When you have connected a unit with a built-in MPEG decoder.
2 These changes to digital audio output must be made, other-
wise bitstream signals the decoder cannot handle will be out-
put. If these signals are output, "noise" will be output which
can cause harm to your ears and speakers.
Connection
Analog
Output as
96 kHz
)
Converted and
output as 48 kHz

Entering a password

Refer also to "Common procedures" (á page 21) and the Disc menu
in "Summary of initial settings" (á page 22).
When setting ratings
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numbered buttons and press
[ENTER].
SETUP
Ratings
Enter a 4-digit password,
then press ENTER.
SELECT
Password
ENTER RETURN
If you enter a wrong number, press [CANCEL] to erase it before
you press [ENTER].
The lock symbol appears closed to show the rating is locked.
Do not forget your password.
2. Press [ENTER] to confirm the 4 digits.
Now, when you insert a DVD that exceeds the ratings limit you
set, a message appears on the television.
Follow the on-screen instructions.
When changing ratings
The password screen is shown when you select "Ratings".
1. Input a 4-digit password with the numbered buttons and press
[ENTER].
SETUP
Ratings
Unlock Player
Change Password
Change Level
SELECT
Temporary Unlock
ENTER RETURN
2. Select the item with [ , ] and press [ENTER], and follow the on-
screen instructions.
(When the level is 8)
✱✱✱✱
(When the level is 0 to 7)
25
RQT5869