Connecting An Amplifier With 5.1-Channel Audio Input Terminals; Connecting An Amplifier With A Built-In Decoder Or A Decoder- Amplifier Combination - Panasonic DVD-RV41 Operating Instructions Manual

Connecting an amplifier with 5.1-
A
channel audio input terminals
Audio cable
White (L)
Red (R)
AUDIO OUT
5.1 ch
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
SURROUND
CENTER
L
OPTICAL
SUB- R
WOOFER SURROUND
CENTER SUB- SURROUND
(L) (R)
WOOFER
³Select "Multi-channel" and adjust the settings to suit the
speakers you have connected (á page 24).
³Select "No" in "PCM Down Conversion" (á page 25).
Note
Turn Advanced Surround off (á page 14) if you have connected a
center speaker, surround speakers or a subwoofer, as well as the
front speakers. Sound will not come from the other speakers if
Advanced Surround is on.
Use the connection described in
ed with DTS.
If you do not connect a subwoofer, it is advisable to connect front
speakers (L/R) capable of producing bass of less than 100 Hz.
Back of the unit
2 ch
L/ VIDEO S VIDEO
L
FRONTL OUT OUT
R/ R
FRONTR
 Connect cables to
terminals
corresponding to
the speakers you
have connected.
FRONT
(L) (R)
Amplifier
Speakers
You can enjoy surround sound by connecting from
three to six speakers.
Example: Six speakers
at right to enjoy DVDs encod-
Connecting an amplifier with a built-
B in decoder or a decoder-amplifier
combination
DIGITAL AUDIO OUT
AUDIO OUT
(PCM/BITSTREAM)
OPTICAL
SUB-
WOOFER
Optical digital audio cable
Do not bend when connecting.
OPTICAL
Adjust the settings to suit the equipment you have con-
nected (á page 25).
Note
You cannot use DTS Digital Surround decoders not suited to DVD.
Back of the unit
VIDEO S VIDEO
OUT OUT
L
R
Insert fully, with
this side facing
up.
27
RQT5869