Home Theatre; Connecting An Analogue Amplifier - Panasonic DVD-RV32 Operating Instructions Manual

terminal on
amplifier
L
Audio cable
R
terminal on amplifier
OPTICAL
Optical digital
audio cable
Insert fully,
with this side facing up
terminal on amplifier
OPTICAL
terminal on
Subwoofer
Audio cable
IMPORTANT
If the equipment you connected cannot
decode the signal, the setting must be
changed to Yes, Off and PCM . If not, signals
the equipment cannot process will be
output by this unit, causing highlevels of
noise which can damage your hearing
and the speakers.
RQTD0003-2B

Home Theatre

Connecting an analogue amplifier or system component
DIGITAL
AUDIO
AUDIO
T
OU
OUT
( PCM/
White
L
BITSTREAM )
Red
R
OPTICAL
Connecting a digital amplifier or system component
DIGITAL
AUDIO
AUDIO
T
OU
OUT
( PCM/
L
BITSTREAM )
R
OPTICAL
Connecting an amplifier with a built-in decoder or a decoder-
amplifier combination
DIGITAL
AUDIO
AUDIO
T
OU
OUT
( PCM/
L
BITSTREAM )
R
OPTICAL
Connecting an active subwoofer
DIGITAL
AUDIO
AUDIO
T
OU
OUT
( PCM/
L
BITSTREAM )
R
SUB-
OPTICAL
WOOFER
If you connect an amplifier with Dolby Pro Logic-decoder you will also need to connect
center and surround speakers to enjoy surround sound.
The Dolby Pro Logic-decoder will not function correctly if A.SRD (ADVANCED SURROUND)
and BASS PLUS is on. Turn A.SRD and BASS PLUS off.
PCM Down conversion
Dolby Digital
DTS Digital Surround
MPEG Audio
VIDEO S VIDEO
OUT OUT
Analogue recording
Please connect You can record to a Mini Disc (MD) or cassette
directly to TV
tape.
SUB-
WOOFER
Digital recording
VIDEO S VIDEO
You can record the digital signal directly onto
OUT OUT
an MD. The recording equipment should handle a
sampling frequency of 48 kHz/16 bit .
Please connect
directly to TV
Change the settings in the SETUP menu "AUDIO"
as follows.
PCM Down conversion
Dolby Digital
DTS Digital Surround
SUB-
MPEG Audio
WOOFER
ADVANCED SURROUND : Off
VIDEO S VIDEO
You cannot use DTS Digital Surround decoders
OUT OUT
not suited to DVD.
Please connect
directly to TV
SUB-
WOOFER
You can enjoy more powerful bass by connecting
VIDEO S VIDEO
OUT OUT
an active subwoofer.
Please connect
Place the subwoofer as close as possible to
directly to TV
the front of the center.
Turn the BASS-function to "BASS PLUS ON"
to boost the output from the subwoofer.
Adjust the volume on the subwoofer to suit your
SUB-
preference.
WOOFER
Yes: connected to an amplifier with an optical digital audio cable.
No: connected an amplifier with audio (phono) cables.
PCM: connected a unit without a built-in Dolby Digital decoder.
Bitstream: connected to a unit with a built-in Dolby Digital decoder.
Off: connected a unit without a built-in DTS decoder.
Bitstream: connected to a unit with a built-in DTS decoder.
PCM: connected a unit without a built-in MPEG decoder.
Bitstream: connected a unit with a built-in MPEG decoder.
: Yes
: PCM
: Off
: PCM
11