Registering A Unit - Panasonic KX-TG8321E Operating Instructions Manual

TG8321E(e-e).book Page 31 Monday, March 3, 2008 2:33 PM
Storing unwanted callers from the
caller list
1
K (centre of joystick) i j i
M
2
{V}/{^}: Select the item to be
barred. i K
3
{V}/{^}: "Add Bar List" i M
4
{ih}
Storing unwanted callers by entering
phone numbers
1
K (centre of joystick) i # i
M i ~
2
Enter the phone number (24 digits
max.). i M
L To erase a digit, press {C/T}.
3
{ih}
Viewing/editing/erasing bar call
numbers
1
K (centre of joystick) i # i
M
2
{V}/{^}: Select the desired item.
i K
L To exit, press {ih}.
3
Proceed with the desired operation.
■ Editing a number:
{V}/{^}: "Edit" i M i
Use the joystick to move the
cursor. i Edit the number. i
M i {ih}
■ Erasing a number:
{V}/{^}: "Erase" i M i
{V}/{^}: "Yes" i M i
{ih}
Note:
L When editing, press the desired dial
key to add, {C/T} to erase.
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Programming

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to a
single base unit.
Important:
L The additional handset model
recommended for use with this unit is
noted on page 5. If another handset
model is used, certain operations
(handset settings, base unit settings,
etc.) may not be available.
Additional base units
Handsets can be registered to up to 4
base units, allowing you to add
additional base units and extend the
area in which your handset(s) can be
used. If a handset moves out of range of
its base unit when "Auto" is selected on
base unit (page 32), it looks for another
base unit to make or receive calls. A
base unit and the handsets it
communicates with is called a "radio
cell".
Note:
L Calls are disconnected when the
handset moves from one radio cell to
another.
31