Panasonic KX-TG8321E Operating Instructions Manual page 55

TG8321E(e-e).book Page 55 Monday, March 3, 2008 2:33 PM
Problem
I do not know how to erase y
(Missed call) from the display.
Programmable settings
Problem
I have changed the display
language to a language I
cannot read.
While programming, the
handset starts to ring.
While programming, the
display returns to standby
mode.
I cannot register a handset to a
base unit.
I cannot remember the PIN.
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Useful Information
Cause/solution
L There are unviewed missed calls remaining.
View them using the following method.
1
K (centre of joystick) i j i M
2
Push the joystick down to search from the
most recent call, or push the joystick up to
search from the oldest call.
Cause/solution
L Change the display language (page 16).
L A call is being received. Answer the call and
start again after hanging up.
L A call matching an entry in the bar call list is
being received. Wait and try again later.
L The maximum number of base units (4) is
already registered to the handset. Cancel
unused base unit registrations from the
handset (page 33).
L The maximum number of handsets (6) is
already registered to the base unit. Cancel
unused handset registrations from the base
unit (page 32).
L You entered the wrong PIN. If you forget your
PIN, see "I cannot remember the PIN."
(page 55).
L Place the handset and the base unit away
from other electrical appliances.
L Change the PIN using the following method.
1
K (centre of joystick) i ! i M
2
{V}/{^}: "Base Unit PIN" i M
3
{*}{7}{0}{0}{0}
4
Enter the new 4-digit base unit PIN. i
M i {ih}
55