Page 1
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
SKU 90168 For technical questions, please call 1-800-444-3353. nOtiCe is used to address practices not related to personal injury. CautiOn, without...
Page 3
Table A shows the correct size to use depending on cord length and nameplate ampere rating. If in SKU 90168 For technical questions, please call 1-800-444-3353. doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.
Use of the compressor for operations different from those intended could result in a hazardous situation. SKU 90168 For technical questions, please call 1-800-444-3353. service Have your compressor serviced by a qualified repair person using only identical replacement parts.
Page 5
To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as SKU 90168 For technical questions, please call 1-800-444-3353. those dust masks that are specially designed to filter out microscopic particles.
Check with a qualified electrician or service personnel if the grounding SKU 90168 For technical questions, please call 1-800-444-3353. instructions are not completely under- stood, or if in doubt as to whether the compressor is properly grounded.
Double insulated compressors may be used in either of the 120 volt outlets shown in the preceding illus- tration. (see Outlets for 2-Prong Plug.) SKU 90168 For technical questions, please call 1-800-444-3353. sPeCiFiCatiOns Electrical 120 V~ / 60 Hz / 210 W Requirements (Load) / 4.5 A (Start Up) /...
Power switch of the compressor to its “OFF” position and unplug the compressor from its electrical outlet before assembling or making any adjustments to the compressor. SKU 90168 For technical questions, please call 1-800-444-3353. tOOl PRessuRe gauge (2a) tanK...
Page 9
Turn the Tool Pressure Regulator clockwise to increase the air pressure to the tool, and counterclockwise to decrease the air pressure. SKU 90168 For technical questions, please call 1-800-444-3353. The Tank The Tool Page 9...
Regulator clockwise to increase pres- sure up to the desired level. WaRning! do not exceed the tool’s maximum air pressure. SKU 90168 For technical questions, please call 1-800-444-3353. the air Compressor is now ready to use. When finished using the Air...
To drain the moisture, Pull the ring on the Safety Valve (3) to relieve all remaining air pressure in the Tank. SKU 90168 For technical questions, please call 1-800-444-3353. Open the Drain (9) on the bottom of the Tank, and tilt the Tank to allow the moisture to drain.
Tank Pressure Gauge Tool Pressure Gauge Safety Valve Air Line Outlet Connector Tool Pressure Regulator Power Cord/Plug Drain Rubber Foot SKU 90168 For technical questions, please call 1-800-444-3353. PaRts list Qty. Part description Circuit Board Pressure Switch Pump Assembly Tank Connector (1/8”-27 NPT)
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 90168 For technical questions, please call 1-800-444-3353. asseMBlY diagRaM...
(90 days if used by a professional contractor or if used as rental equipment). Harbor Freight Tools also warrants to the original purchaser, for a period of ninety days from date of purchase, that all other parts and components of the product are free from defects in materials and workmanship.