Maintenance Schedule; Oil Maintenance; Air Filter Maintenance - Central Pneumatic 67697 Set Up And Operating Instructions Manual

maintenance Schedule

Following are general guidelines for
maintenance checks of the unit.
note: The environment and frequency of
use can affect how often you will need
to check components and perform
maintenance procedures.
daily:
a. Check oil level.
b. Check for oil leaks.
c. Make sure all nuts and bolts are tight.
d. Check for abnormal noise or vibration.
e. Inspect belt.
weekly:
a. Inspect Air Filter.
b. Inspect Oil Breather Plug.
monthly:
Check belt adjustment.
every 6 months or 100 operation Hours:
Replace Pump oil.

oil maintenance

Check the oil periodically for clarity.
Replace oil if it appears milky or if debris
is present, or every 6 months, or 100
hours of run time, whichever comes first.
In harsh environments such as high heat
or high humidity, you will need to replace
the oil more frequently.
wArnIng: Risk of personal injury hazard.
Allow Air Compressor to cool before
changing the oil.
* Use Air Compressor Oil only (sold
separately - SKU 95048).
Page 12
*
For technical questions, please call 1-800-444-3353.
To drain the oil from the Pump Crankcase:
a. Place a container under the Oil Drain
Plug (48).
b. Remove the Oil Fill Plug (63) to allow air
flow into the Pump.
c. Remove the Oil Drain Plug, allowing the
oil to drain into the container.
d. When the oil is completely drained from
the Pump, replace the Oil Drain Plug.
e. Fill the Pump with new compressor oil
to the FULL level on the Oil Sight Glass.
f. Replace and tighten the Oil Fill Plug.
g. Discard the old oil according to local,
state and federal regulations.

Air Filter maintenance

Check the Air Filter weekly to see if it
needs replacement. If working in dirty
environments, you may need to replace
the filter more often. To replace the Air
Filter:
a. Remove any cover that blocks access
to the Air Filter.
b. Remove the Air Filter.
c. Replace with a new Air Filter.
d. Replace the cover.
SKU 67697